Sanitary 3 Piece Ball Valve Direct Mount ISO 5211 - Delta Inc

1 Piece Ball Valves

Features：

Connection type：Clamp end and Weld end
Investment casting
For food and general chemical service application
Working Pressure：1/2” ~ 1-1/2” 1000PSI, 2” ~ 4” 800PSI
100% air tested under water at 100PSI, open and closed positions.
Hydrostatic test pressure：
Body：W.P. 1000PSI
Tube end：W.P. 200PSI
Teflon encapsulated seats maintain sanitary environment.
Blow-out proof stem design.
Inside Polished ≦ Ra 0.4

Options：

Locking device is available if requested.
Cavity filled and non-cavity filled available.

Pressure-Temperature

Material List

NO.	PART NAME	MATERIAL
1	BODY	ASTM CF8 / CF8M / CF3M
2	CAP	ASTM CF8 / CF8M / CF3M
3	BALL	ASTM CF8 / CF8M / CF3M
4	SEAT	PTFE / TFM1600 / 25% CARBON
5	GASKET	PTFE / TFM1600 / 25% CARBON
6	THRUST PACKING	PTFE / TFM1600 / 25% CARBON
7	STEM PACKING	PTFE / TFM1600 / 25% CARBON
8	RING	AISI304
9	BELLEVILLE WASHER	AISI304
10	STEM NUT	AISI304
11	LOCK WASHER	AISI304
12	RING	AISI304
13	HANDLE NUT	AISI304
14	STOP PIN	AISI304
15	HANDLE	AISI304
16	HANDLE SLEEVE	PLASTIC
17	STEM	AISI316
18	SPRING WASHER	AISI304
19	BOLT NUT	AISI304
20	BOLT	AISI304
21	O-RING	VITON

M3HDC

3 Piece Ball Valve Direct Mount Clamp End

SIZE		ISO-5211	ØA±0.2	ØB	L±1.0	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
MM	INCH	ISO-5211	ØA±0.2	ØB	L±1.0	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
15	1/2”	F03-F04	9.5	25.4	89	26	15.5	9	37.0	143	36	42	6	6	9	90
20	3/4”	F03-F04	15.9	25.4	101	26	20.6	9	47.0	143	36	42	6	6	9	100
25	1”	F04-F05	22.2	50.4	114	34	29.0	11	57.2	160	42	50	6	8	11	160
32	1-1/4”	F04-F05	28.5	50.4	124	34	29.0	11	62.5	160	42	50	6	8	11	295
40	1-1/2”	F05-F07	35.0	50.4	140	43	39.0	14	78.2	187	50	70	8	10	14	240
50	2”	F05-F07	47.6	63.8	156	43	42.0	14	86.2	187	50	70	8	10	14	450
65	2-1/2”	F07-F10	60.2	77.6	197	53	48.0	17	109.2	265	70	102	10	12	17	600
80	3”	F07-F10	73.0	91.0	229	53	48.7	17	116.2	265	70	102	10	12	17	1050
100	4”	F10-F12	97.4	119.0	241	56	34.0	22	133.5	393	102	125	12	14	22	1300

M3HDB

3 Piece Ball Valve Direct Mount Butt Weld End

SIZE		ISO-5211	ØA±0.2	ØB	L±1.0	L1	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
MM	INCH	ISO-5211	ØA±0.2	ØB	L±1.0	L1	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
15	1/2”	F03-F04	9.5	12.7	89	18	26	15.5	9	37.0	143	36	42	6	6	9	90
20	3/4”	F03-F04	15.9	19.1	101	21	26	20.6	9	47.0	143	36	42	6	6	9	100
25	1”	F04-F05	22.2	25.4	114	25	34	29.0	11	57.2	160	42	50	6	8	11	160
32	1-1/4”	F04-F05	28.5	31.8	124	27	34	29.0	11	62.5	160	42	50	6	8	11	295
40	1-1/2”	F05-F07	35.0	38.1	140	28	43	39.0	14	78.2	187	50	70	8	10	14	240
50	2”	F05-F07	47.6	50.8	156	25	43	42.0	14	86.2	187	50	70	8	10	14	450
65	2-1/2”	F07-F10	60.2	63.5	197	35	53	48.0	17	109.2	265	70	102	10	12	17	600
80	3”	F07-F10	73.0	76.2	229	43	53	48.7	17	116.2	265	70	102	10	12	17	1050
100	4”	F10-F12	97.4	101.6	241	37	56	34.0	22	133.5	393	102	125	12	14	22	1300

M3HDL

3 Piece Ball Valve Direct Mount Long Butt Weld End

SIZE		ISO-5211	ØA±0.2	ØB	L±1.0	L1	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
MM	INCH	ISO-5211	ØA±0.2	ØB	L±1.0	L1	H1	H2	H3±1.5	H4	E	ØB1	ØB2	C1	C2	K	TURTEQ INCH / LBS
15	1/2”	F03-F04	9.5	12.7	137.0	42.0	26	15.5	9	37.0	143	36	42	6	6	9	90
20	3/4”	F03-F04	15.9	19.1	147.0	44.0	26	20.6	9	47.0	143	36	42	6	6	9	100
25	1”	F04-F05	22.2	25.4	168.0	52.0	34	29.0	11	57.2	160	42	50	6	8	11	160
40	1-1/2”	F05-F07	35.0	38.1	186.0	51.0	43	39.0	14	78.2	187	50	70	8	10	14	240
50	2”	F05-F07	47.6	50.8	223.0	58.5	43	42.0	14	86.2	187	50	70	8	10	14	450
65	2-1/2”	F07-F10	60.2	63.5	250.4	61.0	53	48.0	17	109.2	265	70	102	10	12	17	600
80	3”	F07-F10	73.0	76.2	302.0	79.0	53	48.7	17	116.2	265	70	102	10	12	17	1050
100	4”	F10-F12	97.4	101.6	317.5	75.0	56	34.0	22	133.5	393	102	125	12	14	22	1300